The kind of vehicle usually found within factories, warehouses and various work sites where moving heavy materials from one location to another is required is known as a forklift. The mast is the mechanism situated on the front of the forklift that hydraulically raises and lowers the load. The "cat" is the protected area where the forklift driver sits.
Forklifts are capable of carrying loads between one and five tons in weight. Several types could be utilized to carry shipping containers and much heavier loads.
The tires of a forklift should be inspected and maintained frequently. The types of tires on various forklifts vary based on factors like for example load weights, ground surfaces and frequency of use. Each and every driver of a forklift should have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You should frequently inspect the tires. Watch for indications of wear and damage to the tires. If the wear on the tire exceeds 40 percent, it must be replaced.
When purchasing tires, ensure that you are buying the right kind - pneumatic, polyurethane or solid.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you could easily change the tires.
To remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you only have one jack, lower the forklift, and after that reposition the jack at the next tire.
On-site tire repair can be performed by a repair company. If the tire is extremely large for both in-house and mobile tire presses, the tire which is damaged should be transported to a shop that has a stationary tire press.