Forklift Battery Safe Installation and Charging
Batteries utilized in forklifts are expensive pieces of machines which are pretty large weighing in the thousands of pounds. The task of charging and installing these batteries is something that should be really planned out in advanced so as to make sure that these procedures are able to be done safely and properly. Maintaining a sound charging procedure and correct handling can majorly increase the battery's usual life span.
Standard Charging
It is essential not to connect the battery to the charger until it is at 20% capacity or less. By charging the battery when it is higher than 20 percent, the lifespan of the battery can actually be shortened. On around every 5th charge cycle, the charger should be set on the weekend or equalize setting, depending on which model of charger you are utilizing.
The cycle of charging must not get interrupted. You should avoid using the battery for a few hours once the charge cycle is done. By practicing these procedures, you can help make certain that you get the maximum battery performance available.
Charger Maintenance
Be certain to have the charger turned off while in the process of hooking up the battery to the charger. Connect the charger to the battery and not the forklift. This is a common error which can inadvertently cause damage to both the charger and the forklift. It is also really important that the battery amperage must match that of the charger.
Do not ever allow the battery to deep discharge or completely discharge. This will shorten the battery life greatly and could even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician must be called to be able to re-set the charger prior to charge being able to start.