Within some forklift corporations, the operators are usually on the trucks 7 out of 8 hours per day. They are constantly loading and unloading trucks all day long. Many of these operators do not have to check with supervisors really often, nor do they have to deal with paperwork. Sometimes they are doing the same task during the shift for the duration and they don't even need to move the forks to adapt to various loads. These operators typically find the counterbalanced sit-down units of forklifts a lot more efficient and comfortable.
Several warehouse facilities have a lot of room for forklifts to operate and maneuver in. In these circumstances, a 4-wheel electric or engine-powered forklift remains a key player in the warehousing fleet.
On the other hand, other facilities are crammed to capacity. These facilities could have shipping departments and staging areas which offer limited room for forklift maneuverability. In this specific situation, a 3-wheel electric or stand-up end control forklift model may seem to be a wiser alternative.
Depending on your particular use and environment you are working in, you can then determine how to select the correct truck and pick the correct tire. Next is a brief profile to show you the various kinds of tires offered.
Cushion Tire Trucks - The cushion tire has been specially designed for use on both asphalt or concrete surfaces. More commonly, they are specified for indoor work in warehouses, manufacturing facilities and distribution centers. Typically cushion tire forklifts are smaller than similar capacity pneumatic units; therefore, they usually cost less. This makes their resale value much lower also.
Pneumatic Tire Trucks - Pneumatic tire trucks could go indoors along with outdoors on improved surfaces. These surfaces comprise hard-packed dirt or blacktop and stones. Rough terrain locations such as severely plowed fields or potholed lots are not ideal. The trucks are outfitted with a larger frame. Typically, pneumatic tire trucks are more expensive compared to cushion tire models. With regards to resale, normally the pneumatic units offer higher value. This is in part due to their overall surface versatility and the large amount of maneuvering space they offer.